
To install all SBIG's firmware hex and binary files including Python's script
and libsbigudrv.so library for Linux kernels 2.6.13 and above do the following:

1) Please have a look at the 'sbig_dev_install.py' and possibly 'sbig_dev_permission.py' files
    and adapt them according your needs.

2) su

3) ./sbig_dev_install.py

4) Switch on your SBIG CCD camera and plug it in your computer.
    The camera should be automatically detected and seen with
    the "lsusb" command as shown below The idVendor & idProduct
    has to be 0d97 and 0101, respectively, otherwise no firmware
    was uploaded into your camera.

    Bus 002 Device 024: ID 0d97:0101 Santa Barbara Instrument Group SBIG Astronomy Camera (with firmware)
